Series 100 Fire Damper Model BG
Square/Rectangular spigot, All galvanised steel construction, Blades out of airstreamBeing one of the greatest threats a building can face, fire needs to be contained and quickly extinguished whenever it breaks out.
S100BG Fire Dampers exceed both international and British test requirements, and can prevent fire spreading through ductwork for up to six hours, keeping the fire localised and allowing fire fighters to do their job.
 | View the full S100BG PDF |
| Send the S100BG PDF via email |
Application
- Endurance Tested to BS476-20 by Warrington F.R.C. for 6 hours with guaranteed closure in both vertical and horizontal planes
- Tested to the latest BS1366-2 (ISO10294-1) for the maximum 4 hours at 300 Pascals by the Building Research Establishment
- Square/Rectangular Spigot
- All galvanised steel construction
- Blades out of airstream
All Fire Dampers within the S100B series have a blade pack held entirely outside the airstream during normal operation, making S100BG dampers suitable for use in medium to high velocity airstreams.
The fully galvanised steel construction means that we only recommend these fire dampers are used in ventilation systems where exposure to corrosive substances (salt, chlorine etc) will not be experienced. If corrosion resistance is necessary then S100BM or S100BS models will be of more use.
Description
Independently tested, and proven to satisfy BS1366-2 (ISO10294-1), a four hour fire test with 300Pa of pressure, and BS476-20, a six hour endurance test, you can be certain of truly staggering performance from your HVC Fire Dampers. DW144 leakage tests have also been conducted, and HVC S100 Fire Dampers have been found to satisfy those as well.
In addition to fire testing however, real world conditions need to be simulated. So, dust loading, cycling and corrosion tests have been performed on HVC S100 Fire Dampers to ensure operation even in adverse conditions. In all tests the dampers were observed to latch successfully when released.
We offer a wide range of accessories to make your S100BG more suitable for your installation. Including remote operation equipment including solenoids and electromagnets, visual and remote position indicators, and equipment to aid in normal maintenance. With HVC you will never be made to pay for an accessory you do not want.
Specification
| S100BG | |
| Application | Fire Damper |
| Recommended Use | Fire Protection |
| Overall Dimension | Varies Based on Size, See PDF |
| Overall Depth | 70mm, 140mm Including Spigots |
| Standard Finish | Silver |
| Material | Galvanised Steel |
| Blade Type | Curtain |
| Standard Control Option | Fusible Link (72°C) |
Gallery
Options
 |
Visual Position Indicator Allows the blade pack position to be observed from outside ductwork |
|
Microswitch Creates an electrical circuit when the blade pack closes, informing systems that a fire may have caused the damper to close |
|
Solenoid Releases the fusible link when power is gained, closing the damper remotely |
|
Electromagnet Releases the fusible link when power is lost, enabling remote damper operation |
|
Fusible Link As an alternative to the standard 72°C rating, 96°C, 145°C and 183°C are available on request |
Related
|
Better Corrosion Resistance
For enhanced corrosion resistance S100AM Fire Dampers have a stainless steel blade pack |
|
Need an Installation Frame?
With the choice of a HEVAC or plasterboard fixing frame S100AGH Fire Dampers bring the additional benefits of a builderswork frame |
|
Circular Spigot
S100AG Fire Dampers are designed for square ducting systems. For circular systems S100CG Fire Dampers are required |