Series 100 Fire Damper Model CG
Circular spigot, All galvanised steel construction, Blades out of airstreamBuildings will always need protection against fire, and while prevention is of course best, accidents will happen.
HVC S100CG Fire Dampers are backed up by a bank of ISO and BS tests, all passed successfully and all carried out independently of HVC. In an emergency, you can be sure your HVC fire dampers will perform.
 | View the full S100CG PDF |
| Send the S100CG PDF via email |
Application
- Endurance Tested to BS476-20 by Warrington F.R.C. for 6 hours with guaranteed closure in both vertical and horizontal planes
- Tested to the latest BS1366-2 (ISO10294-1) for the maximum 4 hours at 300 Pascals by the Building Research Establishment
- Circular spigot
- All galvanised steel construction
- Blades out of airstream
All S100C Series Fire Dampers have a circular spigot, and as such are designed to be compatible with circular ducting, whether it be rigid spiral or flexible. During normal operation, the blade pack is stored within an extended compartment, making these fire dampers suitable for use in airstreams of any velocity.
Being constructed from galvanised steel, S100CG Fire Dampers are not designed for use in corrosive environments. See the related products tab for units designed for use in these environments.
Description
The whole range of S100 Fire Dampers have been tested to both BS1366-2 (ISO10294-1) and BS476-20. A four hour test with 300Pa of pressure, and a six hour test at ambient pressure respectively.
To recreate the effects of long term use in ducting, we have also subjected S100 dampers to an array of reliability, dust loading and cycling tests, so you can be sure your dampers will fire, even after years of adverse treatment.
Even after the extensive testing, we know that a standard fire damper sometimes does not come with the features you may need. That is why we offer a comprehensive range of options including micro switches, remote operation devices and visual positioning indicators, all factory fitted to your S100CG Fire Damper.
Specification
| S100CG | |
| Application | Fire Damper |
| Recommended Use | Fire Protection |
| Overall Dimension | Varies Based on Size, See PDF |
| Overall Depth | 70mm, 160mm Including Spigots |
| Standard Finish | Silver |
| Material | Galvanised Steel |
| Blade Type | Curtain |
| Standard Control Option | Fusible Link (72°C) |
Gallery
Options
 |
Visual Position Indicator Allows the blade pack position to be observed from outside ductwork |
|
Microswitch Creates an electrical circuit when the blade pack closes, informing systems that a fire may have caused the damper to close |
|
Solenoid Releases the fusible link when power is gained, closing the damper remotely |
|
Electromagnet Releases the fusible link when power is lost, enabling remote damper operation |
|
Fusible Link As an alternative to the standard 72°C rating, 96°C, 145°C and 183°C are available on request |
Related
|
Better Corrosion Resistance
For enhanced corrosion resistance S100CM Fire Dampers have a stainless steel blade pack |
|
Need an Installation Frame?
With the choice of a HEVAC or plasterboard fixing frame S100CGH Fire Dampers bring the additional benefits of a builderswork frame |
|
Square/Rectangular Spigot
S100CG Fire Dampers are designed for circular ducting systems. For square systems S100BG Fire Dampers are required |
|
Flat Oval Spigot
Perhaps you need a flat oval spigot not circular. S100DG Fire Dampers will be of more use to you |