A CE marked single-blade fire damper available in handle or actuator operated variants, the NCA S400 features reduced leakage characteristics (ES) and has been certified for use in drywall partitions, masonry walls and concrete floors.
The result of years of intensive research, development and testing, the new NCA Series 400 single blade leakage-rated fire damper is now available from HVC.
With a range of innovative features never seen before from a UK manufacturer, the S400 is designed to be as easy as possible to install and use and is available in two variants:
The S400H is equipped with a mechanism permitting testing and resetting of the damper to be completed within seconds with only a single hand (see video demonstration below).
The thermal link is externally replaceable and available in 68°C (standard) or 93°C (high temperature) variants.
The S400A is equipped with a Belimo BFL series actuator (24V or 230V) and comes complete with a 72°C thermal probe.
The S400A is not currently available in 250, 300 and 315mm diameters. We are expecting these sizes in Q2 2022.
The S400 is currently available with three certified installations to suit drywall partitions, masonry walls and concrete floors, all with 120 minute bi-directional 'ES' ratings.
Regardless of the installation type, hole sizes are uniform with the S400. They are also identical to our S700 multi-blade fire damper, meaning one formula can be used to calculate all hole sizes on a project if both S400 and S700 dampers are used.
Our simple plate frame is supplied with pre-cut fixing holes, making installation a genuinely fast process. No backfilling or sealing of apertures is required, nor a pattress frame.
Integrated case sealing rings provide an airtight seal with ductwork, without the use of sealants.
Actuators are supplied factory fitted to dampers, with no site assembly required.
S400H handle mechanism dramatically speeds up mandatory testing. Furthermore, with the S400H, on-site conversion is possible. This makes upgrading from handle to actuator operated possible with simple tools and a HVC supplied conversion kit (see video demonstration below).
NCA Series 400 fire dampers are manufactured in-house, with our industry beating lead times.
If you have any questions about this CE Marked Fire Damper, or any of our products, please feel free to contact us today.